
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-100S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X150-100S is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the extend position anywhere between 50 and 150 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
Built with a short riveted body, this unit saves valuable axial mounting depth where round-body or profile cylinders cannot fit. It includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and relies on a fixed NBR bumper at each end to decelerate the stroke. Note that the 150 mm stroke exceeds the 130 mm standard maximum for this 50 mm bore, making it a non-standard, made-to-order configuration.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 150 mm |
| Adjustable range | 50 – 150 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the extend stop from 50 to 150 mm on the fly to accommodate multiple part families on a single machining fixture without manufacturing replacement spacers.
Safely test vertical lifts of approximately 50 kg by tuning the mechanical stop to prevent overtravel, relying on the fixed NBR bumper to absorb end-of-stroke shock.
When sizing this actuator, evaluate your force requirements bidirectionally.
This model is specified for setups requiring frequent on-site stroke tuning across its 50-150 mm window. It features a 50 mm bore, 150 mm maximum stroke, a 100 mm adjustment window, and a PT1/4 air port. The -S magnet enables position sensing, and the rod-end thread is female M10x1.5. Remember that a plain cylinder does not hold its load on air loss or when the valve is centered; the fixed bumper only decelerates near the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The M16x1.5 R screw mechanically shortens the extend stop by up to 100 mm, allowing usable stroke lengths between 50 and 150 mm. It does not alter the force or act as a mid-stroke lock. The included -S piston magnet works with AirTAC reed or electronic solid-state switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.