
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-30 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 120 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X150-30 is a double-acting compact cylinder featuring an external M16x1.5 R screw that lets you dial the extend stop directly on your machine anywhere from 120 to 150 mm without swapping shims or parts.
Its short riveted body drastically reduces axial mounting depth compared to conventional round-body units, fitting into tight machine envelopes. Note that this 150 mm stroke exceeds the 130 mm standard maximum for a 50 mm bore, making it a non-standard, made-to-order configuration. End-of-stroke deceleration is handled by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 150 mm |
| Adjustable range | 120 – 150 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 120-150 mm extend stop to secure raw castings of varying widths on a single machining center without fabricating custom spacer blocks.
Fine-tune the mechanical stop height during changeovers to position products accurately on varying pallet tiers before the fixed NBR bumper takes the impact.
Choose this specific model if your fixture requires on-site extend tuning within the 120-150 mm window.
Confirm your parameters: 50 mm bore, 150 mm stroke, 30 mm adjust window, PT1/4 port, female M10x1.5 rod thread, and no magnet. This SKU lacks a piston magnet, so it cannot accept reed or electronic switches. Remember that a plain cylinder does not hold position on air loss or valve centering; the fixed bumper only decelerates near the end. For suspended loads, specify an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the M16x1.5 adjuster screw mechanically shortens the extend stroke from the 150 mm maximum down to 120 mm. It sets the end stop without changing the force, and the fixed NBR bumper decelerates the piston at the adjusted position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.