
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-30S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 120 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X150-30S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjuster screw that lets you dial the extend stop directly on the machine between 120 and 150 mm without swapping parts.
This 50 mm bore variant carries a built-in piston magnet for AirTAC reed or electronic switches and uses a PT1/4 air port. Its short riveted body saves axial mounting depth where round-body or profile cylinders cannot fit. Note that the 150 mm stroke exceeds the 130 mm standard maximum for this bore, making it a made-to-order non-standard item. End-of-stroke deceleration relies on a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 150 mm |
| Adjustable range | 120 – 150 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 120 to 150 mm on the fly to test multiple sensor targets during short-run machining changeovers.
Adjust the mechanical stop to tune the pressing depth of carton flaps without changing out the entire actuator assembly.
It is ideal for setups requiring frequent on-site stroke tuning during changeovers.
Confirm the 50 mm bore, 150 mm maximum stroke, 30 mm adjustment window, PT1/4 port, female M10x1.5 rod-end thread, and the -S magnet option. A plain cylinder does not hold its load on air loss or when the valve is centered—the piston drifts and the fixed bumper only decelerates near the end of the stroke. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Turning the M16x1.5 external screw shortens the extend position anywhere between 120 and 150 mm while retracting fully; the -S code indicates a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.