
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-40S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 110 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X150-40S is a compact double-acting double-rod cylinder featuring an external extend stop. A M16x1.5 adjuster screw lets you dial the outward stroke on-site from 110 to 150 mm without swapping shims or parts.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and uses a PT1/4 port. The short riveted body saves axial mounting depth where round-body alternatives will not fit. End shock is managed by a fixed NBR bumper that decelerates the stroke end, not an adjustable air cushion. Note that the 150 mm length exceeds the 130 mm standard maximum for this bore, making it a non-standard made-to-order item.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 150 mm |
| Adjustable range | 110 – 150 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 110 and 150 mm to position workholding clamps precisely against raw castings of varying widths on a single fixture plate.
Adjust the outward reach on the fly during size changeovers to fold varying box flaps without repositioning the cylinder mount.
When sizing this unit, evaluate your force requirements both ways.
Choose this specific configuration if your fixture requires exact outward positioning during frequent changeovers. Confirm the 50 mm bore, 150 mm maximum stroke, 40 mm adjust window, PT1/4 port, female rod thread, and the -S magnet option. Remember that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper and mechanical stop do not lock the load. For secure holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
The M16x1.5 screw shortens the extend end position by up to 40 mm, giving a usable outward range of 110 to 150 mm. The -S code denotes a built-in piston magnet for triggering AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.