
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-50B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 100 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X150-50B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. A M16x1.5 adjuster screw lets you dial the outward stroke anywhere between 100 and 150 mm without changing parts.
This unit carries the -B option, meaning it uses a male M18x1.5 threaded piston rod end instead of the default female cavity. The 150 mm stroke is a non-standard made-to-order length for this 50 mm bore, extending beyond the 130 mm regular catalog maximum. End-of-travel deceleration is handled by a fixed NBR bumper rather than a tunable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 150 mm |
| Adjustable range | 100 – 150 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dialing the extend stop from 100 to 150 mm allows operators to set precise pressing depths for varied material thicknesses without swapping out tooling.
When sizing this 50 mm bore, compare it directly against its neighbors. Dropping down to a 40 mm bore reduces the 0.5 MPa push force to 628.3 N, while stepping up to a 63 mm bore increases it significantly to 1558.6 N.
Choose this specific configuration if your fixture requires exact outward positioning tuned during machine commissioning. Remember that the fixed bumper only decelerates the impact near the end of travel; a plain cylinder does not hold a load if air pressure drops or the valve centers. For suspended loads, integrate an external rod lock or a pilot-operated check valve. This SKU includes a male M18x1.5 rod thread, a PT1/4 port, and lacks a piston magnet, so it cannot accept reed or electronic switches.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
The M16x1.5 screw acts as a mechanical stop, shortening the extend stroke from the 150 mm maximum down to 100 mm. It does not alter the force output. The cylinder cannot hold a load on air loss; the fixed NBR bumper only decelerates impact near the end of travel and acts as a stop, not a lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.