
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-50S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 100 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X150-50S is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 100 to 150 mm directly on your machine.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and uses a 20 mm rod with a PT1/4 port. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. Note that the 150 mm stroke exceeds the standard 130 mm maximum for this 50 mm bore, making it a non-standard, made-to-order unit.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 150 mm |
| Adjustable range | 100 – 150 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on the fly for different box depths, relying on the fixed NBR bumper to absorb the 30-500 mm/s approach speed safely.
Choose this specific configuration when your application requires on-site extend tuning between 100 and 150 mm. It carries the -S magnet for position sensing and a female M10x1.5 rod thread. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centres; the fixed NBR bumper only decelerates the stroke end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa and runs at speeds of 30-500 mm/s.
The M16x1.5 R screw shortens the extend stroke by up to 50 mm, allowing you to set the stop anywhere between 100 and 150 mm without shims. The -S option provides a built-in piston magnet for AirTAC reed or electronic solid-state switches, while the fixed NBR bumper decelerates the end of stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.