
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X160-20 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 140 to 160 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X160-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M16x1.5 adjuster screw, you can dial the forward end-position anywhere between 140 and 160 mm directly on your machine, avoiding the need for shims or part swaps. Because the 160 mm stroke exceeds the 130 mm standard maximum for this 50 mm bore, this specific unit is manufactured as a non-standard, made-to-order configuration.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X160-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 160 mm |
| Adjustable range | 140 – 160 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×160 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 140-160 mm extend stop on the shop floor to perfectly seat casting clamps against varying part tolerances without machining custom spacers.
Set a precise lower end-position for a 50 kg vertical lift actuator, relying on the fixed NBR bumper to absorb the shock of the approach at operating speeds.
Choose this model if your fixture requires exact on-site stroke tuning during setup or changeovers.
Confirm the 50 mm bore, 160 mm stroke, 20 mm adjust window, and PT1/4 port match your pneumatic supply. This specific SKU lacks the -S magnet and cannot accept reed or electronic switches. Note that a plain cylinder does not hold position on air loss or valve centering; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum force is 200 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and the speed range is 30-500 mm/s.
Turning the M16x1.5 R screw shortens the extend stroke by up to 20 mm, giving a usable range of 140-160 mm. The screw acts only as a mechanical end-stop and does not alter the force. It is not a mid-stroke lock; the cylinder will drift if air is lost, so an external rod lock is required for holding loads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.