
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.
An integrated M16x1.5 external adjustment screw allows you to dial the extend end-position down from the 20 mm maximum to a 10 mm minimum directly on the machine. This on-site tuning eliminates the need for shims or part swaps, while a fixed NBR bumper decelerates the stroke end.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 20 mm |
| Adjustable range | 10 – 20 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the push depth on carton closing mechanisms where the 50 kg vertical lift margin handles varying package sizes.
Secure varied workpiece heights in compact machining fixtures using the 10 mm adjustment window without exceeding axial depth limits.
It is ideal for setups requiring frequent changeovers or trial positioning. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston drifts and the bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your 50 mm bore, 20 mm stroke, 10 mm window, PT1/4 port, female rod thread, and lack of a magnet for this SKU.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the M16x1.5 screw shortens the extend stop between 10 and 20 mm without altering the force. This SKU lacks a piston magnet, so it cannot take a switch. The screw is a mechanical stop, not a lock; use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.