
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X20-10B is a compact double-acting double-rod cylinder engineered for tight axial mounting spaces, featuring a short riveted body that avoids the bulk of traditional designs.
A male M18x1.5 piston rod thread (option B) equips this unit, and the external R (M16x1.5) screw lets you dial the extend stop directly on the machine between 10 and 20 mm. The fixed NBR bumper decelerates the stroke end without requiring adjustment, while the lack of a -S magnet means this specific SKU cannot host reed or electronic sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 20 mm |
| Adjustable range | 10 – 20 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M18x1.5 rod extension on-site to accommodate varying package sizes on a conveyor line within a tight footprint.
Set precise lower endpoints for a 50 kg vertical lift application, using the mechanical R screw to fine-tune the 20 mm maximum stroke.
This model suits applications needing on-site stroke tuning during changeovers, but remember it lacks a piston magnet so position sensing is unavailable here. Confirm the 10 mm adjustment window, PT1/4 port, and male M18x1.5 rod end. Because the fixed bumper and R screw act only as mechanical stops, a plain cylinder drifts on air loss; utilize an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
It operates between 0.15-1.0 MPa at 30-500 mm/s.
It is not a mid-stroke lock, and the cylinder cannot hold a load on air loss without an external rod lock or pilot check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.