verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke20 mm
  • Adjustable range10–20 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$64.43 $71.93Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10S

The AirTAC SDAJ50X20-10S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 10 to 20 mm directly on your machine. The short riveted body saves valuable axial mounting depth where a longer profile cylinder will not fit.

A fixed NBR bumper at each end decelerates the stroke end and is not an adjustable air cushion. This unit includes a built-in piston magnet for AirTAC reed or electronic switches, operating at speeds of 30-500 mm/s across a 0.15-1.0 MPa pressure range.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke20 mm
Adjustable range10 – 20 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10S

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×20Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10S Is Used

sync_alt

Changeover Positioning

Quickly reset the mechanical stop for different product heights on a packaging line, using the M16x1.5 adjuster to fine-tune the extend endpoint on the machine.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10S the Right Cylinder?

Choose this model if your fixture requires exact on-site stroke tuning to hit a specific 10-20 mm extend position without machining shims.

Confirm your parameters: 50 mm bore, 20 mm maximum stroke, 10 mm adjust window, PT1/4 port, female M10x1.5 rod-end thread, and the -S magnet for sensing. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the bumper only decelerates near the end. For load holding without live pressure, specify an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–20 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10S FAQ

The M16x1.5 R screw shortens the extend stop by up to 10 mm, giving a usable extend range of 10-20 mm without changing the output force. The included -S magnet works with AirTAC reed or electronic switches mounted in the body grooves for end-position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X20-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.