
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-20 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X20-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the extend position from 0 to 20 mm directly on the machine, eliminating the need for shims or part swaps. Retract remains full, and the adjuster sets the mechanical stop without altering the bore area.
The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke end, which is not an adjustable air cushion. Note this SKU lacks a piston magnet and cannot take a magnetic switch.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 20 mm |
| Adjustable range | 0 – 20 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 20 mm during fixture swaps to accommodate varying part heights without machining new spacers.
Micro-adjust the mechanical stop to find the exact seating depth for pins or bearings during prototype runs before locking the setup.
Choose this specific unit when your fixture requires on-site stroke tuning within the 0-20 mm window.
Confirm the 50 mm bore, 20 mm stroke, 20 mm adjust window, and PT1/4 port. This base configuration has no magnet (-S omitted) and uses a female M10x1.5 rod-end thread. A plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
This 50 mm bore cylinder uses a PT1/4 port.
The M16x1.5 R screw shortens the extend stop by up to 20 mm, giving a usable extend range of 0-20 mm. The screw is strictly a mechanical stop, not a mid-stroke lock. The cylinder cannot hold a load on air loss; use an external rod lock for that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.