
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-20B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X20-20B is a double-acting, double-rod compact cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop from 0 to 20 mm directly on your machine. The short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot.
This specific SKU includes a male M18x1.5 piston rod thread and uses a PT1/4 air port. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this variant ships without a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X20-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 20 mm |
| Adjustable range | 0 – 20 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 0-20 mm extend stop during die swaps to accommodate varying part thicknesses without machining new spacers.
Adjust the male M18x1.5 rod extension on the fly for different carton sizes, ensuring precise mechanical stops during high-changeover runs.
Choose this model if your fixture design requires frequent changeovers or trial positioning that benefits from on-site extend tuning.
Confirm the 50 mm bore, 20 mm maximum stroke, and 20 mm adjustment window suit your motion path. The rod end is male M18x1.5 (-B option), and the air port is PT1/4. Because this SKU lacks the -S magnet, position sensing is unavailable. Remember that a standard compact cylinder does not hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates the stroke end. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Turning the external M16x1.5 screw shortens the extend stroke by up to 20 mm, setting a mechanical stop between 0 and 20 mm; it does not alter force or lock mid-stroke. The cylinder cannot hold a load on air loss and requires an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.