verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-10

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-10 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 25 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke25 mm
  • Adjustable range15–25 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$56.26 $63.76Save 11% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-10

The AirTAC SDAJ50X25-10 is a compact double-acting double-rod cylinder featuring an external extend stop. An M16x1.5 adjuster screw lets you dial the outward end-position between 15 and 25 mm directly on your machine, avoiding shims or part swaps.

Its short riveted body minimizes axial mounting depth where round-body alternatives will not fit. End shock is managed by a fixed NBR bumper that decelerates the piston near the stroke limits, though it is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; choose the -S variant if sensing is required.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-10 Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke25 mm
Adjustable range15 – 25 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-10

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×25Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-10 Is Used

precision_manufacturing

Short-Stroke Clamping

Dial the 15-25 mm extend stop to grip varied workpiece thicknesses on a machining fixture without swapping hardware.

packaging

Carton Forming Stops

Fine-tune the outward push during size changeovers to set precise folding depths for different box dimensions.

vertical_align_center

Vertical Lift Limits

Safely raise a 50 kg payload by capping the upward travel at exactly 20 mm to prevent overshoot into upper tooling.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-10 the Right Cylinder?

When sizing this 50 mm bore, evaluate your force needs against neighboring options.

Operators needing rapid changeover or trial positioning will value the 15-25 mm extend tuning window. Remember that a plain cylinder does not hold position upon air loss or valve centering; the bumper only decelerates near the end and the screw is a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your requirements for bore 50, stroke 25, window 10, PT1/4 port, no magnet, and female rod-end thread.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 15–25 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-10 FAQ

The theoretical maximum push is 200 kgf at 1.0 MPa.

Turning the M16x1.5 external screw shortens the extend end-position by up to 10 mm, yielding a usable outward travel of 15 to 25 mm. The retract stroke remains full. This SKU has no magnet, so it cannot accept position switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X25-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.