
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-10B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X25-10B is a double-acting compact cylinder featuring a male-thread M18x1.5 piston rod and an external M16x1.5 adjuster screw. This mechanism lets you dial the extend end-position anywhere between 15 and 25 mm directly on your equipment, eliminating the need for shims or part swaps during setup. The rod retracts fully regardless of the extend stop setting.
The short riveted body significantly reduces axial mounting depth where a round-body or profile cylinder will not fit. End shock is managed strictly by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 25 mm |
| Adjustable range | 15 – 25 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 15 to 25 mm during prototype runs to find the exact contact point for a 50 kg workpiece without machining new spacers.
Use the compact riveted body to fit tight assembly stations, applying a safe 589 N working load to seat components precisely.
Choose this specific model if your fixture requires on-site stroke tuning between 15 and 25 mm.
Confirm the 50 mm bore, 25 mm stroke, 10 mm adjust window, PT1/4 port, and the male M18x1.5 rod thread for your mounting interface. Note that this SKU lacks a piston magnet, so it cannot accept reed or electronic switches; add the -S option if sensing is required. A plain cylinder does not hold position on air loss or valve centering—the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 1374.4 N. The theoretical maximum push is 200 kgf at 1.0 MPa.
The external M16x1.5 screw mechanically shortens the extend stop from the 25 mm maximum down to 15 mm; it does not alter force. It is not a mid-stroke lock, and the cylinder will not hold a load on air loss—use an external rod lock for that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.