
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-30B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X25-30B is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop down to 0 mm on-site.
This variant features a male M18x1.5 piston rod thread and omits the piston magnet, meaning it cannot host reed or electronic switches. Its short riveted body saves axial mounting depth where round-body or profile cylinders will not fit, while a fixed NBR bumper decelerates the stroke end without acting as a lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 25 mm |
| Adjustable range | 0 – 25 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 0 and 25 mm to find the exact contact point for a 50 kg workpiece, then lock the M16x1.5 screw without swapping shims.
It is ideal for setups requiring frequent on-machine stroke tuning without part changes.
Confirm the 50 mm bore, 25 mm stroke, 30 mm window, PT1/4 port, and the male M18x1.5 rod thread. Note that a plain cylinder does not hold its load on air loss or valve centring; the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
At 0.5 MPa this 50 mm bore cylinder pushes with 981.7 N and pulls with 824.7 N. At 0.7 MPa push increases to 1374.4 N and pull to 1154.5 N. The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the external M16x1.5 screw shortens the extend end-position by up to 30 mm, yielding a usable extend range of 0 to 25 mm. The screw sets a mechanical stop and does not alter force or act as a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.