
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-30S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X25-30S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop down to 0 mm, providing on-site tuning without shims or part swaps.
Its short riveted body minimizes axial mounting depth in tight fixtures, while the integrated -S piston magnet enables position detection with AirTAC reed or electronic switches. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, keeping the footprint minimal for high-force assembly tasks.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X25-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 25 mm |
| Adjustable range | 0 – 25 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on-site to accommodate varying box heights during format changeovers, ensuring precise folding without retooling the line.
Fine-tune the extend endpoint during trial positioning of delicate assemblies, relying on the fixed NBR bumper to absorb end shock at operating speeds up to 500 mm/s.
Choose this specific model if your fixture requires frequent changeovers or trial positioning within the 0 to 25 mm extend window.
Confirm the 50 mm bore, 25 mm stroke, 30 mm adjustment window, PT1/4 port, built-in magnet, and female M10x1.5 rod-end thread meet your envelope. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end of travel and is not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
The M16x1.5 R screw shortens the extend stop by up to 30 mm, yielding a usable 0-25 mm extend range while retract remains full stroke. The included -S magnet works with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.