
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X30-10 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X30-10 is a double-acting compact cylinder featuring an external M16x1.5 R screw that dials the extend stop from 20 to 30 mm directly on your machine.
Its short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches without changing to an -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X30-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 20-30 mm extend stop during initial commissioning to find the optimal contact point for a 50 kg workpiece without machining new spacers.
Quickly turn the M16x1.5 adjuster to alter the stroke end by up to 10 mm when switching conveyor product sizes, saving axial space with its compact riveted body.
Set precise carton folding depth on the fly; the fixed NBR bumper absorbs the end shock while the mechanical stop maintains the chosen position.
Engineers who need precise trial positioning during setup or frequent product changeovers benefit most from the 10 mm extend window. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centres; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, stroke, window, PT1/4 port, female M10x1.5 rod thread, and lack of magnet for this build.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The external R screw shortens the extend end position from the nominal 30 mm down to 20 mm without changing the force. It acts only as a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load if air is lost, so use an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.