
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X30-30SB is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X30-30SB is a double-acting, double-rod compact cylinder featuring an on-site adjustable extend stop. An external M16x1.5 adjuster screw lets you dial the outward stroke from 0 up to 30 mm without swapping shims or parts, while the retract remains full length.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M18x1.5 rod end. The short riveted body minimizes axial footprint where space is tight. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X30-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the outward stroke on the fly for different carton depths, relying on the fixed NBR bumper to absorb the end shock at operating speeds.
Stepping down to the SDAJ40 yields 628.3 N, whereas moving up to the SDAJ63 provides 1558.6 N.
Choose this specific configuration if your fixture requires frequent changeovers or trial positioning. Verify your setup needs a 50 mm bore, a 30 mm maximum stroke with a 30 mm window, and a PT1/4 air port. This model includes the -S magnet for position sensing and the -B male M18x1.5 rod thread. Remember that a standard cylinder drifts when air is lost or the valve centers; the bumper decelerates the end stroke but does not lock the load. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
This 50 mm bore cylinder uses a PT1/4 port.
The M16x1.5 screw shortens the extend stop anywhere from 0 to 30 mm without changing the output force. The included -S magnet works with AirTAC reed or electronic switches for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.