
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X35-10S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X35-10S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw. This mechanism lets you dial the extend end-position anywhere between 25 and 35 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains full length, while the stop sets the location without altering the pneumatic area.
The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. A fixed NBR bumper decelerates the stroke ends, and the built-in magnet (-S) supports AirTAC reed or electronic solid-state switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X35-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dials the extend stop from 25 to 35 mm to seat parts of varying widths against a fixed machining fence.
Adjusts the push rod end-position on the fly to fold different box heights without swapping hardware.
Sets a precise lower mechanical stop for a 50 kg lift, preventing over-travel while relying on the bumper for deceleration.
Choose this specific model if your fixture requires frequent on-site stroke tuning between 25 and 35 mm.
Confirm the 50 mm bore, 35 mm stroke, 10 mm adjust window, and PT1/4 port. The -S code indicates the internal magnet is present for sensing, and the rod end uses a female M10x1.5 thread. Remember that a plain cylinder drifts if air is lost or the valve is centred; the fixed bumper only decelerates near the end and is not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the M16x1.5 screw shortens the extend stroke by up to 10 mm, giving a usable range of 25 to 35 mm. The included -S magnet works with AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.