
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X40-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you set the extend position anywhere between 20 and 40 mm directly on the machine, eliminating shims.
Its short riveted body drastically saves axial mounting depth where round-body or profile cylinders cannot fit. End shock is handled by a fixed NBR bumper that decelerates the piston near stroke end, though it is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the 50 mm bore uses a PT1/4 port with a 20 mm piston rod.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 40 mm |
| Adjustable range | 20 – 40 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Reposition a sorting gate on the fly during product changeovers, using the M16x1.5 adjuster to accommodate varying package widths on the line.
Choose this model if your fixture requires on-site stroke tuning during changeovers.
Confirm the 50 mm bore, 40 mm max stroke, 20 mm window, and PT1/4 port. Note this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; specify the -S option if sensing is required. Remember that a plain cylinder does not hold a load on air loss or valve centering—the fixed bumper only decelerates, so add an external rod lock or pilot-operated check valve for held loads.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The external M16x1.5 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 40 mm maximum down to 20 mm. It sets the end position without changing the output force, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.