
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X40-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches. By turning the R (M16x1.5) adjuster screw, you set the extend end-position anywhere between 20 and 40 mm directly on the machine, eliminating the need for shims or part changes. Retract travel remains full length.
The adjuster sets the mechanical stop, not the piston area, meaning output force equals a standard SDA of this bore. The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. End shock is handled by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 40 mm |
| Adjustable range | 20 – 40 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 40 mm via the R screw to find the exact contact point on prototype tooling before locking it down.
Accommodate different carton depths on the same line by adjusting the extend endpoint without swapping out the entire cylinder body.
Choose this model when your fixture requires exact on-site stroke tuning during frequent changeovers. Confirm your required 20 to 40 mm window, PT1/4 port, and the female M10x1.5 rod thread.
A plain pneumatic cylinder does not hold its load when air is lost or the valve is centred; the piston drifts and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. This unit includes the -S magnet for sensing and operates at 30-500 mm/s.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
The M16x1.5 adjuster screw shortens the extend stroke by up to 20 mm, giving a usable extend range of 20 to 40 mm. The included -S magnet works with AirTAC reed or electronic solid-state switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.