
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X45-40S is a double-acting compact cylinder featuring an external M16x1.5 R-thread adjuster screw. By turning this screw, you can precisely shorten the extend end-position on-site, yielding a usable stroke range of 5 to 45 mm without swapping shims or parts.
Its short riveted body significantly reduces axial mounting depth, fitting where round-body or profile cylinders cannot. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. This specific unit includes a built-in piston magnet (-S), enabling position sensing when paired with AirTAC reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 45 mm |
| Adjustable range | 5 – 45 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 5 to 45 mm to accommodate varying raw material thicknesses on a milling fixture without machining new spacer blocks.
Adjust the mechanical stop position to handle mixed SKU pallet layers, using the fixed NBR bumper to absorb the kinetic energy at the extend end.
Choose this model if your fixture requires frequent on-machine stroke tuning during changeovers.
Verify your parameters: 50 mm bore, 45 mm nominal stroke, 40 mm adjust window, PT1/4 port, and a female M10x1.5 rod-end thread. The -S magnet is present for switch mounting. Remember that a plain cylinder does not hold position on air loss or valve centring—the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The M16x1.5 adjuster screw mechanically shortens the extend stroke by up to 40 mm, allowing the rod to stop anywhere between 5 and 45 mm. The -S option denotes a built-in piston magnet designed to trigger AirTAC reed or electronic switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.