verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-50

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-50 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 45 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke45 mm
  • Adjustable range0–45 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$63.96 $71.46Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-50

The AirTAC SDAJ50X45-50 is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop anywhere between 0 and 45 mm directly on your machine. Retract travel stays at the full 45 mm length.

Its short riveted body drastically cuts axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke shock is handled by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-50 Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-50
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke45 mm
Adjustable range0 – 45 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-50

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×45Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-50 Is Used

packaging

Carton Forming Changeover

Quickly adjust the mechanical stop on-site for varying package depths, relying on the fixed NBR bumper to absorb the 30-500 mm/s approach speed safely.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-50 the Right Cylinder?

Choose the 50 mm bore when your setup falls squarely in that mid-range force band.

This model is ideal for operators needing frequent on-site stroke tuning during changeovers without swapping shims or parts. Confirm your requirements for a 50 mm bore, 45 mm maximum stroke, 50 mm adjust window, PT1/4 port, female M10x1.5 rod thread, and no magnet. Remember that a plain cylinder does not hold a load on air loss or valve centering; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-50 FAQ

The theoretical maximum push is 200 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.

The M16x1.5 R screw shortens the extend stop by up to 50 mm, giving a usable extend range of 0-45 mm. The screw acts only as a mechanical stop and does not alter force. It will not hold a load if air is lost; use an external rod lock or pilot-operated check valve for load holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-50

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X45-50 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.