
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X5-10S is a compact double-acting double-rod cylinder engineered for tight axial spaces. It features an external M16x1.5 R-thread adjuster screw that lets you dial the extend stop down from 5 mm to 0 mm directly on the machine, eliminating the need for shims or part swaps during commissioning.
This 50 mm bore unit relies on a fixed NBR bumper at each end to decelerate the stroke, meaning it is not an adjustable air cushion. The riveted body design drastically reduces mounting depth compared to larger profile alternatives, while the included -S piston magnet supports position sensing with either reed or electronic switches. Operating speed spans 30-500 mm/s, and the pneumatic port is PT1/4.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 5 mm |
| Adjustable range | 0 – 5 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×5 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
The external M16x1.5 screw allows operators to fine-tune the extend endpoint on the factory floor instantly, avoiding part changes when switching product profiles.
It is ideal for setups requiring frequent on-site stroke tuning or trial positioning within that 0-5 mm extend window.
Remember that a plain compact cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel and the R screw is a mechanical stop, not a lock. For load holding without live pressure, you must integrate an external rod lock or pilot-operated check valve. Confirm your bore, 5 mm maximum stroke, 10 mm adjustment window, PT1/4 port, built-in magnet (S), and female M10x1.5 rod-end thread before finalizing.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The M16x1.5 R-thread screw shortens the extend stop by up to 10 mm, yielding a usable extend range of 0-5 mm without changing output force. The built-in -S magnet enables position detection using AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.