
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10SB is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X5-10SB is a compact double-acting double-rod cylinder engineered for precise short-stroke positioning. A built-in piston magnet supports AirTAC reed or electronic switches, while the male M18x1.5 piston rod thread provides a robust attachment point. An external R (M16x1.5) adjuster screw lets you dial the extend stop down to a 0-5 mm window on the machine without swapping parts.
The short riveted body saves axial mounting depth where a round-body cylinder will not fit. End shock is absorbed by a fixed NBR bumper that decelerates the stroke end, though it is not an adjustable air cushion. Operating speed ranges from 30-500 mm/s, and the PT1/4 air port feeds the 50 mm bore efficiently.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 5 mm |
| Adjustable range | 0 – 5 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×5 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reset the male M18x1.5 rod position on packaging lines during product changeovers, avoiding the need for shims or cylinder disassembly.
Use the R (M16x1.5) external screw to fine-tune the extend endpoint during laboratory testing, finding the exact 0-5 mm contact point for delicate sensors.
Choosing this 50 mm bore involves sizing both ways against your force requirements.
Operators needing on-site stroke tuning for trial positioning will benefit from the mechanical extend stop. Remember that a plain cylinder does not hold its load when air is lost or the valve is centred; the piston drifts and the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your bore, 5 mm stroke, 10 mm window, PT1/4 port, S magnet, and male B rod thread before ordering.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The R (M16x1.5) screw shortens the extend stop by up to 10 mm, yielding a usable 0-5 mm extend range. The included S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.