
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X50-10B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X50-10B is a compact double-acting double-rod cylinder featuring an on-site extend stop. Turning the external M16x1.5 adjuster screw lets you dial the forward end-position anywhere between 40 and 50 mm without swapping shims or parts.
This variant uses a male M18x1.5 piston rod thread and carries no piston magnet. Its short riveted body drastically cuts axial mounting depth where a larger profile body cannot fit. End shock is managed strictly by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X50-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 50 mm |
| Adjustable range | 40 – 50 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the 40-50 mm extend stop on the fly to set new pushing depths during product family changeovers, avoiding the need to swap physical spacers.
Choose this 50 mm bore when the smaller 40 mm lacks thrust or the 63 mm is physically too large.
Operators needing frequent line changeovers or trial positioning will benefit from the 10 mm extend tuning window. Confirm your requirements for the PT1/4 air port, male M18x1.5 rod end, and the lack of a magnet. Remember that a plain SDAJ does not hold a load if air pressure drops or the valve centers; the bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The M16x1.5 screw acts as a mechanical stop that shortens the forward stroke from the 50 mm maximum down to 40 mm. It does not alter the bore's force or lock the piston mid-stroke. Because this SKU lacks the -S magnet, it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.