
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X50-10S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X50-10S is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M16x1.5 screw lets you dial the outward stroke anywhere between 40 and 50 mm without changing parts, while retract remains full length.
Its short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. This specific unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X50-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 50 mm |
| Adjustable range | 40 – 50 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the outward reach on the fly to match varying carton depths, using the fixed NBR bumper to absorb the 50 kg dynamic load at the end of travel.
Set a mechanical lower limit for a 50 kg lift application, relying on the 10 mm window to adjust the resting height without swapping the entire cylinder body.
Choose it when you need on-site stroke tuning to perfect a tooling position.
Confirm the 50 mm bore, 50 mm maximum stroke, 10 mm adjustment window, and PT1/4 air port. The -S magnet is present, and the rod-end thread is female M10x1.5 (male M18x1.5 optional with a B code). Remember that a plain cylinder does not hold its load on air loss or valve centring; the bumper only decelerates near the end. For a locked load without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the external R (M16x1.5) screw shortens the extend stroke by up to 10 mm, giving a usable range of 40-50 mm; it sets the stop and does not change force. The -S code means a built-in magnet is present for tracking position with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.