
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X50-20S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X50-20S is a double-acting compact cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop directly on your machine between 30 and 50 mm.
Its short riveted body drastically reduces axial mounting depth compared to conventional round-body or profile cylinders, fitting into tight machine envelopes. The unit includes a fixed NBR bumper to decelerate the stroke end and ships with a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X50-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 50 mm |
| Adjustable range | 30 – 50 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on the fly for varying box depths, using the fixed NBR bumper to absorb the impact of rapid 30-500 mm/s cycling.
This model is ideal for setups requiring frequent on-site stroke tuning without part changes. Remember that a plain cylinder does not hold position on air loss or valve centering; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your bore, 50 mm stroke, 20 mm window, PT1/4 port, female M10x1.5 rod thread, and the required -S magnet.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The external R (M16x1.5) screw shortens the extend stop by up to 20 mm, yielding a usable 30 to 50 mm stroke. The included -S magnet enables position sensing using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.