
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X50-30B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X50-30B is a compact double-acting double-rod cylinder featuring an external extend stop. An M16x1.5 adjuster screw lets you dial the forward end-position anywhere between 20 and 50 mm directly at the machine, eliminating the need for shims or part swaps.
Designed to save axial mounting depth, the short riveted body fits where round-body alternatives will not. This specific SKU includes a male M18x1.5 piston rod thread and a fixed NBR bumper at each end to decelerate the stroke. Note that this variant lacks a piston magnet, so it cannot support reed or electronic switches without the -S option.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X50-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 50 mm |
| Adjustable range | 20 – 50 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M18x1.5 rod end position on the fly for different box heights, ensuring precise flap folding during rapid format changeovers.
Stepping down to an SDAJ40 yields 628.3 N, while stepping up to an SDAJ63 provides 1558.6 N.
This model is ideal for setups requiring frequent on-site stroke tuning between 20 and 50 mm during changeovers. It features a PT1/4 port, a male M18x1.5 rod end, and no magnet. Remember that the fixed NBR bumper only decelerates the stroke end; a plain cylinder drifts when air is lost or the valve is centered. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the M16x1.5 screw shortens the extend stroke by up to 30 mm, allowing a usable range of 20 to 50 mm. The screw is a mechanical stop, not a mid-stroke lock. The cylinder cannot hold a load on air loss and requires an external rod lock for position holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.