
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X55-20S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X55-20S is a double-acting compact cylinder featuring a 50 mm bore and an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the forward stroke down by up to 20 mm directly on the machine, yielding a usable extend range of 35-55 mm without swapping shims or parts.
This riveted-body design saves substantial axial mounting depth where a round-body or profile cylinder will not fit. It includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, while a fixed NBR bumper at each end handles end-of-stroke deceleration. The screw is a positioning stop, not a mid-stroke lock, meaning the piston will drift if air pressure is lost.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X55-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 55 mm |
| Adjustable range | 35 – 55 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the forward position on the line for different box depths without changing parts; the fixed NBR bumper absorbs the repeated end shock of high-speed folding.
Choose this specific model if your fixture requires frequent on-site stroke tuning during changeovers. Confirm your parameters: 50 mm bore, 55 mm max stroke, 20 mm adjust window, PT1/4 port, female M10x1.5 rod thread, and the -S magnet for sensing. For any application requiring the load to be held without live pressure, add an external rod lock or pilot-operated check valve, as the fixed bumper only decelerates near the end of travel and does not brake.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 1374.4 N. The theoretical maximum push is 200 kgf at 1.0 MPa.
The -S code denotes a built-in piston magnet designed to trigger AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.