
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X55-40S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X55-40S is a double-acting compact cylinder featuring an external M16x1.5 R adjuster screw that lets you dial the extend stop directly on the machine. You can set the outward travel anywhere between 15 and 55 mm without swapping shims or parts, while the retract stroke remains full length.
This 50 mm bore unit saves valuable axial mounting depth thanks to its short riveted body, fitting where larger profile cylinders cannot. It carries a fixed NBR bumper at each end to decelerate the stroke, though this is not an adjustable air cushion. The -S suffix indicates a built-in piston magnet for position sensing with AirTAC reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X55-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 55 mm |
| Adjustable range | 15 – 55 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 15 to 55 mm on the R screw to adapt stops for different part lengths during production line changeovers without machining new spacers.
Choose this 50 mm option when you need on-site stroke tuning between 15 and 55 mm to accommodate frequent changeovers or trial positioning.
Confirm the 50 mm bore, 55 mm maximum stroke, 40 mm adjustment window, and PT1/4 port match your pneumatic layout. The rod end thread is female M10x1.5 (or male M18x1.5 if specified), and the -S magnet enables switch mounting in the body grooves. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; for load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the M16x1.5 R screw shortens the extend stroke by up to 40 mm, allowing you to set the outward stop anywhere between 15 and 55 mm. The -S suffix means a piston magnet is built in for tracking position with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.