
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-10 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X60-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the extend end-position anywhere between 50 and 60 mm directly on your machine, eliminating the need for shims or part swaps.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. This specific SKU ships without a piston magnet, so it cannot host reed or electronic switches; choose an -S variant if sensing is required.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 60 mm |
| Adjustable range | 50 – 60 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the stroke by up to 10 mm on-site to accommodate varying carton depths while maintaining consistent 50 kg vertical clamping force.
Adjust the mechanical stop to find the exact 55 mm insertion depth for delicate bearings, relying on the fixed NBR bumper to absorb the final shock.
Choose this model if your assembly line requires frequent changeovers or trial positioning within the 50-60 mm window.
Confirm the 50 mm bore, 60 mm maximum stroke, 10 mm adjustment window, and PT1/4 port. Note that this base configuration lacks the -S magnet and uses a female M10x1.5 rod-end thread. A plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Turning the external R (M16x1.5) screw shortens the extend stroke by up to 10 mm, giving a usable range of 50-60 mm. This specific SKU has no piston magnet; you must select the -S option to use reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.