verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-10B

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-10B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke60 mm
  • Adjustable range50–60 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$68.82 $76.32Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-10B

The AirTAC SDAJ50X60-10B is a double-acting compact cylinder featuring an external M16x1.5 R adjuster screw that dials the extend stop between 50 and 60 mm. The short riveted body saves valuable axial mounting depth in tight machinery envelopes.

This specific SKU includes a male M18x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without changing to an -S variant. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-10B Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke60 mm
Adjustable range50 – 60 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-10B

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×60Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-10B Is Used

precision_manufacturing

Press Fit Dial-In

Use the 50-60 mm extend window to micro-adjust pressing depth on bearing insertion lines without changing tooling.

packaging

Carton Flap Folding

Accommodate varying box heights on a packaging conveyor by turning the M16x1.5 screw to set the exact folding stop.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-10B the Right Cylinder?

When sizing this unit, compare its 981.7 N @0.5 MPa push force against adjacent bores: the SDAJ40 provides 628.3 N, while the SDAJ63 offers 1558.6 N. Choose this 50 mm bore when the smaller frame lacks thrust or the larger one is physically too wide.

The 10 mm adjustable window is ideal for setups requiring trial positioning or frequent changeovers without swapping shims. Confirm your installation needs the male M18x1.5 rod (-B), the PT1/4 air port, and the 60 mm maximum stroke. Remember that a plain SDAJ does not hold position on air loss or valve centering; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For suspended loads, integrate an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 50–60 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-10B FAQ

The air port is PT1/4.

The external R screw shortens the extend stroke on-site from the 60 mm maximum down to 50 mm without affecting force. This SKU uses a male M18x1.5 piston rod thread and lacks a magnet, so it cannot support magnetic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-10B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X60-10B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.