
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-20H is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X60-20H is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. This unit includes an H designation, meaning it uses fluororubber (FKM) seals for enhanced thermal and oil resistance.
Its short riveted body drastically cuts axial mounting depth where round-body or profile cylinders cannot fit. The extend position is set mechanically by turning the external screw, which governs the end stop without altering the internal piston area. End-of-travel shock is managed solely by a fixed NBR bumper that decelerates the piston, rather than an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-20H |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 60 mm |
| Adjustable range | 40 – 60 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 60 mm via the M16x1.5 screw to accommodate different part heights on a machining line without swapping out cylinders.
Choose the 50 mm bore if your setup needs that specific force band.
The 20 mm adjustment window is ideal for machines requiring frequent changeovers or trial positioning. Remember that a standard cylinder will not hold a load if air pressure drops or the valve centers; the piston drifts, and the fixed bumper only slows the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. This specific SKU lacks a piston magnet, so it cannot accept magnetic switches—order the -S variant if sensing is required. It features a female M10x1.5 rod-end thread, a PT1/4 port, and operates at 30-500 mm/s.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The operating speed ranges from 30 to 500 mm/s.
Turning the external R (M16x1.5) screw mechanically shortens the extend end-position by up to 20 mm, giving a usable range of 40 to 60 mm. It acts only as a stop and does not lock the piston mid-stroke; the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.