
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-30SB is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X60-30SB is a compact double-acting double-rod cylinder engineered for on-site extend positioning. An external M16x1.5 adjuster screw lets you dial the forward stop anywhere between 30 and 60 mm without swapping shims or parts.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M18x1.5 threaded rod end (-B) for direct mounting. The short riveted body minimizes axial footprint, while fixed NBR bumpers absorb end-of-stroke shock. Note that the adjuster acts strictly as a mechanical stop, not a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the folding arm position on the fly for mixed box sizes, relying on the fixed NBR bumper to absorb the repetitive end-of-stroke impact.
Choose this specific configuration if your fixture requires frequent changeovers or trial positioning within its 30 to 60 mm forward window. Confirm the PT1/4 air port, the male M18x1.5 rod, and the integrated magnet. Remember that standard double-acting operation will not hold a load during air loss or valve centering; deploy an external rod lock or pilot-operated check valve for secure positioning.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
The M16x1.5 screw shortens the extend stroke from the 60 mm maximum down to 30 mm. The built-in magnet (-S) works with AirTAC reed or electronic solid-state switches to detect piston position along the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.