verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-75S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-75S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 60 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke60 mm
  • Adjustable range0–60 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$78.85 $86.35Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-75S

The AirTAC SDAJ50X60-75S is a compact double-acting double-rod cylinder engineered for on-site extend positioning. An external M16x1.5 adjuster screw lets you dial the extend stop down by up to 75 mm, yielding a usable extend range of 0 to 60 mm.

Its short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot. The unit relies on a fixed NBR bumper at each end to decelerate the stroke end and is equipped with a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches. Note that this mechanical stop is not a mid-stroke lock; the cylinder drifts if air pressure is lost.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-75S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-75S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke60 mm
Adjustable range0 – 60 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-75S

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×60Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-75S Is Used

package_2

Variable Depth Sealing

Adjust the mechanical stop on the fly for different carton depths, ensuring the 50 mm bore applies consistent sealing pressure without crushing the contents.

vertical_align_center

Tiered Pallet Placement

Set precise lower positions for stacking varying pallet heights, using the fixed NBR bumper to decelerate the load safely at the adjusted end point.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-75S the Right Cylinder?

Choose this specific model if your fixture requires frequent on-machine stroke tuning or trial positioning during changeovers.

Remember that a plain SDAJ does not hold position when air is removed or the valve is centred; integrate an external rod lock or pilot-operated check valve for load-holding without live pressure. This configuration features a 60 mm maximum stroke, a 75 mm adjustment window, a PT1/4 port, a female M10x1.5 rod-end thread, and the -S magnet for sensing. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–60 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-75S FAQ

It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.

The M16x1.5 R screw shortens the extend stroke by up to 75 mm, giving a usable 0-60 mm extend range without shims. The included -S piston magnet works with AirTAC reed or electronic switches for position sensing; the adjuster is a mechanical stop, not a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-75S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X60-75S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.