
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-20SB is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X65-20SB is a compact double-acting double-rod cylinder featuring an on-site extend stop. A built-in M16x1.5 adjuster screw lets you dial the outward stroke anywhere between 45 and 65 mm, eliminating the need for shims or part swaps during machine commissioning.
This variant includes a male M18x1.5 piston rod thread and a built-in magnet for position sensing. The short riveted body conserves axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a locking brake.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 65 mm |
| Adjustable range | 45 – 65 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 45-65 mm extend stop via the M16x1.5 screw to set exact clamping depth on raw castings without swapping cylinder bodies.
When sizing this 50 mm bore, consider the adjacent options. Choose this specific model if your fixture requires exact 45-65 mm outward positioning tuned directly on the machine.
Confirm the bore, 65 mm maximum stroke, 20 mm adjustment window, and PT1/4 port. This unit carries the -S magnet for AirTAC reed or electronic switches and the -B male M18x1.5 rod end. Remember that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
The external R screw shortens the extend stroke by up to 20 mm, allowing any outward position between 45 and 65 mm; retract remains full. The included -S magnet enables detection by AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.