
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-30SB is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X65-30SB is a compact double-acting double-rod cylinder built for on-site extend-position tuning. An external M16x1.5 adjuster screw lets you dial the outward stop anywhere between 35 and 65 mm without swapping parts.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M18x1.5 rod end. The short riveted body minimizes axial footprint, while a fixed NBR bumper decelerates the stroke end. The mechanical stop is not a lock; expect drift if air pressure drops.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 65 mm |
| Adjustable range | 35 – 65 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 65 mm via the M16x1.5 screw to accommodate different part widths on the same line without machining new spacers.
Adjust the outward stroke on the fly for carton flap folding operations that require different pressing depths based on board thickness.
Choose it when you need on-machine stroke tuning during frequent changeovers.
Confirm the 65 mm maximum stroke, 30 mm adjustment window, and PT1/4 port. This specific configuration carries the -S magnet for position sensing and the -B male M18x1.5 rod thread. Remember that a plain cylinder does not hold position upon air loss; install an external rod lock or pilot-operated check valve if load holding is required.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the external R (M16x1.5) screw shortens the extend stroke by up to 30 mm, yielding a usable 35 to 65 mm range. The included -S magnet enables detection by AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.