
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-75S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X65-75S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that lets you dial the extend stop directly on your machine. You can set the outward stroke anywhere from 0 to 65 mm without shims or part changes, while the retract remains full length.
The short riveted body minimizes axial mounting depth where larger profile or round-body units will not fit. This specific configuration includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves. End-of-travel shock is handled by a fixed NBR bumper, which decelerates the piston near the ends but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 65 mm |
| Adjustable range | 0 – 65 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 65 mm on the fly to accommodate different part lengths during production line changeovers without swapping hardware.
Safely test vertical lift points up to a 50 kg payload by fine-tuning the outward reach during initial fixture setup before locking down the sequence.
If your application requires less force, stepping down to an SDAJ40 yields 628.3 N at 0.5 MPa; conversely, moving up to an SDAJ63 provides 1558.6 N for heavier payloads.
This 50 mm bore is ideal for setups needing frequent on-site stroke tuning to accommodate changeovers or trial positioning. Confirm your specs: a 65 mm maximum stroke with a 75 mm window, PT1/4 air port, female M10x1.5 rod-end thread, and the -S magnet. Note that a plain cylinder does not hold position if air pressure drops or the valve centers; for load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The M16x1.5 R screw shortens the extend end position by up to 75 mm, giving a usable outward range of 0-65 mm. The included -S magnet allows tracking via AirTAC reed or electronic switches, while the fixed NBR bumper decelerates the stroke end without locking the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.