verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-10S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-10S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke70 mm
  • Adjustable range60–70 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$83.25 $90.75Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-10S

The AirTAC SDAJ50X70-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M16x1.5 R screw lets you dial the outward stroke down by 10 mm, yielding a usable extend range of 60 to 70 mm directly on the machine without swapping parts.

This model features a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves. The short riveted body conserves axial mounting depth in tight fixtures, while a fixed NBR bumper at each end decelerates the stroke end. It is not an adjustable air cushion, nor does it function as a mid-stroke lock.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-10S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-10S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke70 mm
Adjustable range60 – 70 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-10S

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×70Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-10S Is Used

precision_manufacturing

Fixture Clamp Calibration

Dial in the exact 60-70 mm extend position during tooling changeovers to clamp parts of varying widths without fabricating custom spacers.

package_2

Carton Flap Folding

Fine-tune the folding arm stop on the fly by up to 10 mm to accommodate different box profiles while maintaining 981.7 N of clamping force at 0.5 MPa.

vertical_align_center

Vertical Lift Dwell

Set a precise upper travel limit for a 50 kg lift application, using the M16x1.5 screw to prevent over-travel in tight vertical spaces.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-10S the Right Cylinder?

Choose it when your setup demands on-site stroke tuning across a 60-70 mm window.

Confirm the 50 mm bore, 70 mm maximum stroke, 10 mm adjustment window, PT1/4 port, and the female M10x1.5 rod-end thread. The included -S magnet enables position sensing. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston drifts and the bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 60–70 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-10S FAQ

The theoretical maximum push is 200 kgf at 1.0 MPa.

The M16x1.5 adjuster screw shortens the extend stroke by up to 10 mm, giving a usable range of 60-70 mm. The built-in -S magnet allows you to use AirTAC reed or electronic switches for position sensing along the body grooves.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X70-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.