
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-20B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X70-20B is a double-acting compact cylinder featuring an on-site adjustable extend stop. A built-in M16x1.5 adjuster screw lets you dial the outward stroke anywhere between 50 and 70 mm without swapping shims or parts.
This unit utilizes a short riveted body to minimize axial mounting depth where space is tight. It comes with a male M18x1.5 piston rod thread and a PT1/4 air port. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, and this specific SKU lacks a piston magnet, so it cannot support position sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 70 mm |
| Adjustable range | 50 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 50 and 70 mm to seat clamping jaws precisely on variable part widths without machining custom spacers.
Adjust the mechanical end stop to set precise lifting heights for payloads up to 50 kg, preventing over-travel in tight vertical spaces.
Choose this model when your fixture requires exact outward reach tuning during setup or changeover.
Confirm the 50 mm bore, 70 mm maximum stroke, and 20 mm adjustment window suit your cycle. Verify the PT1/4 porting matches your fittings and that the male M18x1.5 rod end mates with your tooling. Note that a plain cylinder drifts on air loss or valve centering—the fixed bumper only decelerates near the end and is not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa. It uses a PT1/4 air port and operates between 30 and 500 mm/s.
The M16x1.5 screw mechanically shortens the extend stroke by up to 20 mm, allowing on-site tuning from 50 to 70 mm. It does not alter the bore area or force. The cylinder cannot hold a load on air loss; the fixed NBR bumper only decelerates the stroke end. Add an external rod lock for true load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.