
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-20S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X70-20S is a compact double-acting double-rod cylinder built for applications requiring precise extend positioning. An external M16x1.5 adjuster screw lets you dial the extend stop down from the 70mm maximum to 50mm directly on the machine.
Its short riveted body drastically cuts axial mounting depth where a larger profile cylinder will not fit. The unit includes a built-in piston magnet for AirTAC reed or electronic switches, while fixed NBR bumpers handle end-of-stroke deceleration. Operating speed spans 30-500mm/s across a 0.15-1.0MPa pressure range.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 70 mm |
| Adjustable range | 50 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the M16x1.5 screw on-site to perfect the folding arm reach for different box heights, ensuring crisp taping without retooling the line.
Choose this specific 70mm stroke with the 20mm window if your fixture requires frequent on-site extend tuning between 50mm and 70mm without swapping shims.
Remember that a plain cylinder does not hold its load if air pressure drops or the valve centres; the piston will drift. The fixed bumper only decelerates the stroke end and the R screw acts as a mechanical stop, neither serving as a brake. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your spec: 50mm bore, 70mm stroke, 20mm adjust window, PT1/4 port, female M10x1.5 rod thread, and the -S magnet.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0MPa at speeds of 30-500mm/s.
The M16x1.5 R screw mechanically shortens the extend endpoint from 70mm down to 50mm without changing the force output. The included -S magnet allows tracking via AirTAC reed or electronic solid-state switches, while fixed NBR bumpers absorb end shocks.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.