
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X70-30 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the forward end-position anywhere between 40 and 70 mm directly on the machine, eliminating the need for shims or part swaps.
Built with a short riveted body, this unit saves axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 70 mm |
| Adjustable range | 40 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M16x1.5 stop from 40 to 70 mm to accommodate varying raw stock thicknesses on a milling fixture without machining new spacers.
Fine-tune the downward extend position in real-time to match varying pallet load heights, relying on the fixed NBR bumper to absorb the 50 kg payload impact.
When sizing this 50 mm bore, evaluate your thrust requirements against its neighbours.
Choose the SDAJ50X70-30 if your fixture requires on-site stroke tuning between 40 and 70 mm. Confirm your porting matches the bore-fixed PT1/4 thread and that the female M10x1.5 rod-end fits your linkage. Because a plain cylinder drifts when air is lost or the valve is centred, integrate an external rod lock or pilot-operated check valve if the load must be held. This configuration has no magnet (no -S code) and uses a female rod thread (no -B code).
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Turning the external M16x1.5 screw shortens the extend stroke by up to 30 mm, allowing you to set the forward stop anywhere between 40 and 70 mm. The retract stroke remains full, and the mechanism only sets the stop position—it does not act as a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.