verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 70 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke70 mm
  • Adjustable range40–70 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$83.25 $90.75Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30S

The AirTAC SDAJ50X70-30S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M16x1.5) screw lets you dial the outward stroke down by up to 30 mm directly on the machine, yielding a usable extend range of 40 to 70 mm without swapping shims or parts.

The short riveted body saves valuable axial mounting depth where a longer cylinder would not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. This specific unit includes a built-in piston magnet (-S) for use with AirTAC reed or electronic solid-state switches.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke70 mm
Adjustable range40 – 70 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30S

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×70Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30S Is Used

straighten

Gauge Tooling Setup

Dial in the 40-70 mm extend stop during initial gauge setup to hit exact clamping depth without machining custom spacers.

sync_alt

Product Changeover

Quickly reposition the outward stroke by up to 30 mm when switching between 50 kg product variants on the same conveyor line.

view_module

Trial Positioning

Use the R (M16x1.5) screw to test actuation endpoints safely, finding the optimal push point before locking down the fixture.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30S the Right Cylinder?

Choose this 50 mm option when you need that mid-tier force plus on-site stroke tuning during frequent tooling changeovers.

Confirm the bore, 70 mm max stroke, 30 mm window, and PT1/4 port suit your manifold. This variant has the -S magnet for sensing and a female M10x1.5 rod-end thread. Note that a plain cylinder does not hold a load on air loss or valve centred; the piston drifts and the bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–70 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30S FAQ

The built-in -S magnet allows tracking via AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X70-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.