
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-40S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X70-40S is a double-acting, double-rod compact cylinder featuring an on-site adjustable extend stop. An external M16x1.5 screw lets you dial the outward stroke down from the 70 mm maximum to a 30 mm minimum without changing parts.
Its short riveted body saves valuable axial mounting depth where larger profile or round-body units cannot fit. End-of-travel impact is managed by a fixed NBR bumper that decelerates the rod, though it is not an adjustable air cushion. This specific unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 70 mm |
| Adjustable range | 30 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 30 and 70 mm to accommodate varying raw stock thicknesses on a fixture without machining new spacers.
Adjust the outward reach on-site to match different box heights during format changeovers, ensuring precise flap contact every time.
Set mechanical upper limits for lifts handling up to 50 kg, using the fixed NBR bumper to decelerate the payload at the end of travel.
Choose this 50 mm bore when your fixture mass sits in that middle band.
The 40 mm adjustment window is ideal for machines requiring frequent product changeovers or trial positioning. Remember that a standard double-acting cylinder does not hold position upon air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the end of travel. To suspend a load without live pressure, integrate an external rod lock or pilot-operated check valve. This configuration includes the magnet (S) for sensing and uses a female M10x1.5 rod-end thread with a PT1/4 port.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
The M16x1.5 adjuster screw mechanically shortens the extend stroke by up to 40 mm, yielding a usable 30 to 70 mm range. It sets the stop position without altering force. The included magnet (-S) allows tracking via AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.