
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-50 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X70-50 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the forward stroke down by up to 50 mm directly on your machine, yielding a usable extend range of 20 to 70 mm without swapping shims or parts. Retract remains full, and the adjuster strictly sets the mechanical stop position without altering the pneumatic area.
The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, and this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 70 mm |
| Adjustable range | 20 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the R screw to set the extend stop between 20 and 70 mm, ensuring a 981.7 N clamping force at 0.5 MPa does not crush delicate castings during fixture changeovers.
Adjust the forward travel on-site to match varying box heights, using the fixed NBR bumper to absorb the end shock without needing custom shims for each format.
Choose this model if your fixture setup requires frequent on-site stroke tuning between 20 and 70 mm.
Confirm the 50 mm bore, 70 mm maximum stroke, 50 mm adjustment window, and PT1/4 port. This base configuration has no -S magnet, meaning position sensing is unsupported here; add the S option if you need switches. Remember that a plain cylinder does not hold its load on air loss or when a valve is centred—the piston drifts, and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The M16x1.5 R screw mechanically shortens the extend stop by up to 50 mm, giving a 20 to 70 mm usable range without changing the force. This specific SKU lacks a piston magnet; you must select the -S option to use AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.