
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-50S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X70-50S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjuster screw that lets you dial the extend stop anywhere between 20 and 70 mm directly on the machine.
Its short riveted body saves valuable axial mounting depth where larger profile or round-body units fail to fit. The unit includes a built-in piston magnet for AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the end-of-stroke impact. Note that this bumper is not an adjustable air cushion, nor does the adjuster serve as a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 70 mm |
| Adjustable range | 20 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on-site to accommodate different box heights, ensuring precise folding action while the fixed NBR bumper absorbs the end shock.
It is ideal for setups requiring frequent on-site stroke tuning across the 20-70 mm window without changing parts. Confirm your required bore, 70 mm maximum stroke, 50 mm adjust window, PT1/4 port, female M10x1.5 rod thread, and the requested -S magnet. Remember that a plain cylinder drifts if air is lost or the valve is centered; utilize an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The M16x1.5 adjuster screw shortens the extend stroke by up to 50 mm, allowing usable endpoints between 20 and 70 mm. The -S option includes a built-in piston magnet for position detection using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.