
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-20SB is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X75-20SB is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. A built-in M16x1.5 adjuster screw lets you dial the outward stroke anywhere between 55 and 75 mm, eliminating the need for shims or part swaps during machine commissioning.
This variant includes a male M18x1.5 piston rod end and a built-in magnet for position sensing. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. For reliable mid-stroke position feedback, the internal magnet works seamlessly with AirTAC reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 75 mm |
| Adjustable range | 55 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 55 to 75 mm via the M16x1.5 screw to adapt a 50 mm bore actuator to varying jig heights without machining new spacers.
Fine-tune the outward push against different box profiles on the fly, relying on the fixed NBR bumper to absorb the 981.7 N impact at the end of travel.
Dropping to an SDAJ40 yields 628.3 N, whereas stepping up to an SDAJ63 provides 1558.6 N.
Choose this specific configuration if your fixture requires exact outward positioning during changeovers. Confirm the 50 mm bore, 75 mm max stroke, 20 mm window, and PT1/4 port match your pneumatic layout. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. For suspended loads, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
The external R screw shortens the extend end position from the 75 mm maximum down to 55 mm. The built-in -S magnet allows you to track piston position using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.