
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40SH is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X75-40SH is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop precisely between 35 and 75 mm. This specific configuration includes a built-in piston magnet for position sensing and fluororubber (FKM) seals for enhanced thermal and oil resistance.
Designed with a short riveted body, this unit saves axial mounting depth where a larger profile cylinder will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30-500 mm/s, and the PT1/4 port matches the 50 mm bore specification exactly.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40SH |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 75 mm |
| Adjustable range | 35 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 35-75 mm extend stop on the fly to accommodate different part heights during production line changeovers without swapping cylinders.
Adjust the extend position on-site for carton sealing heads, ensuring proper contact pressure across varied package dimensions.
Choose this 50 mm option when you need robust force in a tight footprint and require frequent on-machine stroke tuning during changeovers.
Confirm the 50 mm bore, 75 mm maximum stroke, 40 mm adjustment window, PT1/4 port, female M10x1.5 rod-end thread, and the -S magnet for AirTAC reed or electronic switches. Remember that a plain cylinder does not hold position if air pressure drops or the valve is centered; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 1374.4 N and pull to 1154.5 N. The theoretical maximum push force is 200 kgf at 1.0 MPa.
The external M16x1.5 screw shortens the extend stroke by up to 40 mm, allowing you to set the stop anywhere between 35 and 75 mm without shims. The included -S magnet works with AirTAC reed or electronic solid-state switches mounted in the body grooves for precise end-position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.