
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-50SB is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X75-50SB is a double-acting compact cylinder featuring a male-thread piston rod and an on-site extend stop. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches. Turning the external M16x1.5 adjuster screw lets you dial the forward stroke anywhere between 25 and 75 mm without swapping shims or components.
The short riveted body minimizes axial mounting depth, while a fixed NBR bumper decelerates the piston at the end of travel. Note that this bumper is not an adjustable air cushion, nor does the screw act as a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 75 mm |
| Adjustable range | 25 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M18x1.5 rod extension on the fly to match different box heights, ensuring precise sealing head placement across rapid product changeovers.
Set intermediate downward travel points for stacking layers of varying heights, relying on the fixed NBR bumper to absorb the impact at each programmed stop.
When sizing this unit, evaluate your thrust requirements against neighboring bores. Choose this specific model if your fixture requires frequent changeovers or trial positioning within the 25 to 75 mm forward window.
Confirm the 50 mm bore, 75 mm maximum stroke, 50 mm adjustment window, and PT1/4 air port match your pneumatic layout. This variant includes the -S magnet for switch sensing and the -B male M18x1.5 rod end. Remember that a standard compact cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end of the stroke. For suspended or vertical loads that must hold position without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The included -S magnet works with AirTAC reed or electronic switches to confirm end-of-stroke position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.